رقم الشفرة |
المقابض المتوافقة |
وصف الشفرة |
الاستخدام
|
6 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
9 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
10 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
Curved cutting edge with an unsharpened back edge. A more traditional blade shape. |
Generally for making small incisions in skin and muscle, and often utilised in more specialised surgeries such as for harvesting the radial artery during a coronary artery bypass operation, opening the bronchus during thoracic surgery and for Inguinal hernia repair.
|
10a |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
This blade is a small and straight |
|
11 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
Triangular blade with sharp point, flat cutting edge parallel to the handle and flat back |
For precision cutting, stripping, sharp angle cuts and also stencil cutting due to its similarity to the X-Acto artknife blade
|
11P |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
E11 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
E/11 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
12 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
A small, pointed, crescent-shaped blade sharpened on the inside edge of the curve |
|
12D |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
A small, pointed, crescent-shaped blade sharpened on both sides of the curve |
|
13 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
14 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
15 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
A smaller version of the #10 |
For the same general use as the #10 blade
|
15A |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
A front-facing straight blade with flat back |
|
15C |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
The #15 with a downward angle, flatter and thinner than the #15 |
The downward angle makes this the preferred blade for working within the chest during cardiac surgery, and is commonly used to make the distal arteriotomy during coronary artery bypass grafting.
|
15T |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
D/15 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
16 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
A narrow chisel-like blade with flat, angled cutting edge, positioned higher than the axis of the handle |
For cutting stencils, scoring and etching
|
17 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
A flat face 1.6 mm chisel blade |
For narrow cuts
|
18 |
4, أربعة Graduated, أربعة Long, 6 |
A 12.7 mm chisel blade |
For deep cuts and scraping
|
19 |
4, أربعة Graduated, أربعة Long, 6 |
A similar blade to the #15 |
|
20 |
4, أربعة Graduated, أربعة Long, 6 |
A larger version of the #10 blade, with a curved cutting edge and a flat, unsharpened back edge. |
Used in general surgery and orthopaedic surgery.
|
21 |
4, أربعة Graduated, أربعة Long, 6 |
|
22 |
2, 4, 5, 6 |
A slightly larger version of the #20, with a curved cutting edge and a flat, unsharpened back edge. |
Used for skin incisions in both cardiac and thoracic surgery, and to cut the bronchus in lung resection surgery.
|
22A |
4, أربعة Graduated, أربعة Long, 6 |
|
23 |
4, أربعة Graduated, أربعة Long, 6 |
Similar to #22, leaf-shaped |
For long incisions.
|
24 |
4, أربعة Graduated, أربعة Long, 6 |
A wide, flat, angled cutting edge |
For corner cuts, trimming, stripping, and cutting mats and gaskets
|
25 |
4, أربعة Graduated, أربعة Long, 6 |
A front-facing straight blade with flat back (similar to #15a) |
|
25a |
4, أربعة Graduated, أربعة Long, 6 |
A triangular straight blade with flat back edge taking a downwards angle (similar to #10a, shorter than #26) |
|
26 |
4, أربعة Graduated, أربعة Long, 6 |
A triangular straight blade with flat back edge taking a downwards angle (similar to the #15a, longer than #25a) |
|
27 |
4, أربعة Graduated, أربعة Long, 6 |
|
34 |
4, أربعة Graduated, أربعة Long, 6 |
A triangular blade similar to the #11
|
36 |
4, أربعة Graduated, أربعة Long, 6 |
A larger blade |
Used in general surgery but also within a Laboratory setting for Histology and Histopathology
|
40 |
B3, 3, ثلاثة Graduated, ثلاثة Long, 5, 7, 9 |
|
PM40 |
Stainless PM Handle |
|
PM40B |
Stainless PM Handle |
|
60 |
4, أربعة Graduated, أربعة Long, 6 |
A long blade resembling the #10 with a long cutting edge, rounded tip and flat back. |
|
PM60 |
PM8 |
|
PM60B |
PM8 |
|