بلى

البلى Wear

أنماط الانهيار الميكانيكي
Buckling
تآكل
زحف
كلل
كسر
Melting
Rupture
Thermal shock
برى
خضوع
     

في فهم المواد, البلى wear هوتآكل المادة من سطح صلب بعمل جسم صلب آخر. دراسة عمليات البلى هي جزء من تخصص الاحتكاك. وهناك خمس عمليات بلى رئيسية:

  1. Adhesive wear
  2. Abrasive wear
  3. Surface fatigue
  4. Fretting wear
  5. Erosion wear

The definition of wear does not include loss of dimension from plastic deformation, although wear has occurred despite no material removal. This definition also fails to include impact wear, where there is no sliding motion, cavitation, where the counterbody is a fluid, and corrosion, where the damage is due to chemical rather than mechanical action.

Wear can also be defined as a process in which interaction of the surfaces or bounding faces of a solid with its working environment results in dimensional loss of the solid, with or without loss of material. Aspects of the working environment which affect wear include loads (such as unidirectional sliding, reciprocating, rolling, and impact loads), speed, temperature, type of counterbody (solid, liquid, or gas), and type of contact (single phase or multiphase, in which the phases involved can be liquid plus solid particles plus gas bubbles).

Adhesive wear

Adhesive wear is also known as scoring, galling, or seizing. It occurs when two solid surfaces slide over one another under pressure. Surface projections, or asperities, are plastically deformed and eventually welded together by the high local pressure. As sliding continues, these bonds are broken, producing cavities on the surface, projections on the second surface, and frequently tiny, abrasive particles, all of which contribute to future wear of surfaces.


Abrasive wear

When material is removed by contact with hard particles, abrasive wear occurs.. The particles either may be present at the surface of a second material (Two-body wear) or may exist as loose particles between two surfaces (Three-body wear). Abrasive wear can be measured as loss of mass by the Taber Abrasion Test according to ISO 9352 or ASTM D 1044.

Surface fatigue

Surface fatigue is a process by which the surface of a material is weakened by cyclic loading, which is one type of general material fatigue.

Fretting wear

Fretting wear is the repeated cyclical rubbing between two surfaces, which is known as fretting, over a period of time which will remove material from one or both surfaces in contact. It occurs typically in a bearings, although most bearings have their surfaces hardened to resist the problem. Another problem occurs when cracks in either surface are created, known as fretting fatigue. It is the more serious of the two phenomena because it can lead to catastrophic failure of the bearing. An associated problem occurs when the small particles removed by wear are oxidised in air. The oxides are usually harder than the underlying metal, so wear accelerates as the harder particles abrade the metal surfaces further. Fretting corrosion acts in the same way, especially when water is present. Unprotected bearings on large structures like bridges can suffer serious degradation in behaviour, especially when salt is used during winter to deice the highways carried by the bridges. The problem of fretting corrosion was involved in the Silver Bridge tragedy and the Mianus River Bridge accident.

انظر أيضاً

  • Rheology
  • احتكاك
  • Surface Engineering
  • Pin on disc tester Equipment used to measure wear

الهامش

تاريخ النشر: 2020-06-07 11:45:19
التصنيفات: أنماط الانهيار الميكانيكي, علم المواد

مقالات أخرى من الموسوعة

سحابة الكلمات المفتاحية، مما يبحث عنه الزوار في كشاف:

آخر الأخبار حول العالم

فورمولا واحد: ريد بول يفصل مُتهِمة هورنر بـ"السلوك غير اللائق"

المصدر: فرانس 24 - فرنسا التصنيف: سياسة
تاريخ الخبر: 2024-03-07 18:07:44
مستوى الصحة: 76% الأهمية: 97%

حريمات يعتلي صدارة هدافي البطولة الوطنية

المصدر: الأول - المغرب التصنيف: سياسة
تاريخ الخبر: 2024-03-07 15:28:21
مستوى الصحة: 49% الأهمية: 63%

حريمات يعتلي صدارة هدافي البطولة الوطنية

المصدر: الأول - المغرب التصنيف: سياسة
تاريخ الخبر: 2024-03-07 15:28:20
مستوى الصحة: 59% الأهمية: 50%

النيبت يشارك في سحب قرعة كأس أمم أفريقيا للفوتسال "المغرب 2024"

المصدر: البطولة - المغرب التصنيف: رياضة
تاريخ الخبر: 2024-03-07 18:06:57
مستوى الصحة: 59% الأهمية: 66%

غوتيريش يدعو إلى وقف إطلاق النار في السودان خلال رمضان

المصدر: فرانس 24 - فرنسا التصنيف: سياسة
تاريخ الخبر: 2024-03-07 18:07:43
مستوى الصحة: 89% الأهمية: 95%

الانتخابات الأوروبية: ما هي رهاناتها في ظل تصاعد اليمين المتطرف؟

المصدر: فرانس 24 - فرنسا التصنيف: سياسة
تاريخ الخبر: 2024-03-07 18:07:25
مستوى الصحة: 92% الأهمية: 88%

الخارجية الروسية: ماكرون يحاول استعراض عضلاته في مولدوفا

المصدر: RT Arabic - روسيا التصنيف: سياسة
تاريخ الخبر: 2024-03-07 18:07:54
مستوى الصحة: 80% الأهمية: 100%

تحميل تطبيق المنصة العربية